Hydrostatic Pressure Testing
Turner Hydraulic Group has a wide range of hydrostatic testing equipment readily available as well as experienced engineers. All of our water pumps have inverted drives allowing for control of delivery flow and fill rates from 2m³ to 800m³ with an extensive range of pressure and head height capabilities.
All of our hydrostatic test equipment is calibrated to UKAS Class1, although other options are available. Our ranges of pressures are from 0 to 3000 Bar, all recorded, using Hydrotechnik data log solutions - this includes temperature, pressure and flow transducers, enabling us to provide detailed electronic certification, including graphs, which demonstrate clear visibility of each pressure test, staged increases in pressure, hold stages, test period and the decrease stages.
We can also flush and filter the Boiler water, using large duplex filtration down to 25 micron, directly mounted to the supply storage and weir type tanks within our standard scope of work. We can also supply antifreeze protection with MPG (Mono Propylene Glycol) covering a range of temperature protection, if required.
Although our work is normally site-based, we have full test capability in our workshop at Magor, South Wales for smaller items. These can be for use on oil or water systems, and again our pressure range is from 0 to 3000 Bar with full certification as detailed above.
Turner Hydraulic Group has successfully completed the steam boiler pressure tests and associated pipe work at the following Energy from Waste facilities:
In addition to hiring us to carry out hydrostatic pressure testing services, we also provide the option of renting out equipment. Please see our Hydrostatic and Water Pumps page to see our range of hydrostatic testing pumps and equipment available to rent.
If you are looking for a reliable and experienced hydrostatic pressure testing company then contact us today: 01633 881966.
We can also flush and filter the Boiler water, using large duplex filtration down to 25 micron, directly mounted to the supply storage and weir type tanks within our standard scope of work. We can also supply antifreeze protection with MPG (Mono Propylene Glycol) covering a range of temperature protection, if required.
Although our work is normally site-based, we have full test capability in our workshop at Magor, South Wales for smaller items. These can be for use on oil or water systems, and again our pressure range is from 0 to 3000 Bar with full certification as detailed above.
Turner Hydraulic Group has successfully completed the steam boiler pressure tests and associated pipe work at the following Energy from Waste facilities:
- Belvedere Boiler No.3 & Pipe Work > 200m³ capacity
- Newhaven Boilers No. 1, 2 & Pipe Work > 100m³ capacity
- Runcorn Boilers No. 3 & 4 > 200m³ capacity
- Ferry Bridge Boilers No. 1 & 2 > 200m³ capacity
- St. Austell Boilers No. 1 & 2 & Pipe Work > 100m³ capacity
- Cardiff ACC (Air Condensed Cooler) Air test
- Staffordshire Hydraulic pipe work test and flush
In addition to hiring us to carry out hydrostatic pressure testing services, we also provide the option of renting out equipment. Please see our Hydrostatic and Water Pumps page to see our range of hydrostatic testing pumps and equipment available to rent.
If you are looking for a reliable and experienced hydrostatic pressure testing company then contact us today: 01633 881966.